Control Process of Zinc Wheel Weights Production in Cangzhou ShengshiWeiye 1.Melt the national standard refined lead ingot. 2.Formed by one-time die-casting mold. 3.Manual inspection and trimming of the four corners of the edge for regular processing. 4.Electrostatic spraying of epoxy r...

Frequently Asked Questions about Steel wheel weights I. Questions related to quality and precision 1. How high is the precision of Steel wheel weights? Generally, the precision of high-quality steel wheel weights can reach ±1 - 2 grams. This is because they are made by precision mold casting...

Heavy duty adhesive wheel weights are used on wheels of heavy vehicles (such as heavy trucks, large buses, engineering vehicles, etc.). Due to their large mass and high load, the requirements for balance are more stringent, so heavy duty adhesive wheel weights are needed. Heavy duty adhesive w...

Adhesive wheel weights – what’s the difference? Ever counted how many of your customers have aluminum rims on their cars? Of course there are a lot. And for you, that means you just need to buy more adhesive wheel weights. The more in stock, the better, that’s for sure. Which type of wheel weigh...

Reliable Solution - The Professional Bonded Weights range is recommended for a high quality all-round tyre shop bonded weight installation. Particularly recommended for use on new or refurbished alloy rims. Why can't adhesive wheel weights stick to alloy rims? 1.Incomplete surface cleaning ...

Adhesive wheel weights are mainly composed of a block material and a sticky adhesive layer. The block material is usually a metal with a higher density such as lead, zinc or iron, which can provide enough weight to balance the wheel in a smaller volume. The adhesive layer is generally a hi...

Black wheel weights can complete wheel balance adjustment without affecting the overall appearance of the vehicle. Black wheel weights have a low-key color. [caption id="attachment_4376" align="aligncenter" width="750"] Fe stick on wheel weight Wide brim[/caption] This color blends well wit...

What is a cross wrench A cross wrench, also known as a lug wrench or wheel wrench, is a tool designed for installing and removing lug nuts on automotive wheels. The word "cross" in the name comes from the cross-shaped configuration of the tool. It usually has four handles, each of which extends ...

The answer is No. The tire sidewall is a relatively weak part of the tire. Compared with the tire tread, the sidewall is more difficult to repair and requires higher safety. The tire sidewall is mainly composed of rubber and cord layer. The cord layer is woven from fiber cords, and its fu...

About Tire Changer FAQ Why are the prices lower than the big brands? Compared to the big brands, our marketing and promotion expenses are very low, and we invest the funds into production, development and design. The fully automatic integrated production line perfectly solves the generation of ...

What is the required ceiling height for the car lift? The lifting height of a two-post lift is between 1.8 and 2.5 meters. If we consider that the height of an ordinary car is about 1.4 to 1.5 meters, the total height of the vehicle after the two-post lift is fully lifted may reach about 3.5 to ...

Shengshi Weiye strongly recommends that you consult a concrete specialist early in the process of planning your car lift installation. The concrete specialist will tailor these recommendations based on national and regional building codes as well as local weather conditions, soil composition, fou...