TR414 Snap-in Tubeless Tire Valve Stem | 38mm Long EPDM Rubber & Brass

Tubeless Tire Valves TR414

While the TR414 fits the industry-standard 11.5mm (.453") rim hole, its 38mm length makes it the preferred choice for specific applications:

• Passenger Cars & SUVs: Ideal for modern SUVs with deep-set alloy wheels.

• Light Trucks: Provides easier access for air pressure gauges and inflator chucks on commercial light duty vehicles.

• Custom Rims: Essential for aftermarket wheels where a shorter TR412 or TR413 would be difficult to reach.

Tire valve tr414

Tire valve tr414

Tire valve tr414

Tire valve tr414

About this Tire Valves TR414

Why the TR414 is the Industry Standard for Longer Valves: The TR414 snap-in valve is specifically designed for rims that require a longer stem for easier access during inflation. At 38mm long, it provides extra clearance compared to the TR413, making it the preferred choice for vehicles with decorative wheel covers or deep-set rim holes. Our TR414 valves feature EPDM rubber, which offers 3x the ozone resistance of standard rubber, preventing premature cracking and air loss.

TR412 vs. TR413 vs. TR414: Which one do you need?

All three models fit the standard 11.5mm (.453") rim hole, but the difference lies in the length:

• TR412 (22mm): Best for motorcycles, ATVs, and small custom wheels.

• TR413 (32mm): The most common size for standard passenger car rims.

• TR414 (38mm): The ideal choice for larger passenger cars, light trucks, and wheels with thick hubs or hubcaps.

At Shengshiweiye, safety is our top priority. Every batch of our TR414 tubeless valves undergoes rigorous testing protocols before shipment:

1. High-Pressure Leak Test: Ensures the valve core and rubber body can handle up to 65 PSI without air loss.

2. Pull-out Force Test: Verifies that the snap-in bulb remains securely seated in the rim during high-speed centrifugal force.

3. Aging Test: Simulates years of road use to ensure the rubber maintains its integrity.

Various applications

Snap-on valve stems for tubeless rim holes (11.5mm) diameter; Standard diameter makes them fit for most cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs and motorcycles;

Easy to install

With bolt-on design, these rubber tire valve stems are easy to install. Remove the tire from the rim side to reveal the tire valve and tire stem caps of the car; Remove the worn air valve stem and then insert the new wheel valve stem and tire valve caps from inside the rim.

Built to last

These tire valve stems are manufactured with high temperature brass valve cores and O-zone resistant EPDM rubber; 100% ozone tested and leak tested.

Tr414 Tire Valve FAQ

• Q: What is the maximum pressure for TR414 valves?

  • A: TR414 snap-in rubber valves are rated for a maximum cold inflation pressure of 65 PSI.

• Q: Can TR414 valves be used in winter conditions?

  • A: Yes. Our EPDM TR414 valves remain flexible and leak-proof in temperatures as low as -40°C, making them ideal for cold climates and road salt exposure.

• Q: How often should TR414 valves be replaced?

  • A: It is professionally recommended to replace your TR414 valve stems every time you install new tires to ensure maximum safety.

Information related to tire valve stems

What are the different types of tire valves of tire?.

How much is a tire valves replacement?

About Tire Valve – what is a valve stem

If you are a tire shop owner, we recommend replacing the TR414 valve stem with every new tire installation to ensure the safety and longevity of the wheel assembly.

tire valve tools